| Info |
Part No. |
Description |
 |
4000 |
CBP-25182-4W Connector (Equivalent to Rebling 7007) |
 |
4002 |
CONCORDE FAA Model no CBP3349-2W - Equivalent to MS3349-2 (2-wire) style BD16-1 or
Rebling 7003 w shell installed Similar to Rebling 7017 or Elcon BD-13-1 w shell
removed NE WT 5 LBS CONNECTOR TYPE |
 |
4010 |
Cannon-type plug (Equiv to Rebling 8003 Mil-spec MS3349-3) |
 |
4102-ADAPTER |
CONCORDE Parasitic load test adaptor NE WT 1 LBS CONNECTOR TYPE |
 |
4163 |
CONCORDE BC-5000 Analyzer: Fully automatic testing for 12V24V lead-acid batteries only
Testing is powered by--the battery -being-tested-There-is-no-AC-powerrequired
The constant current load is adjustable in 1 amp increments from 10 to 50 ADC
Features: LCD display Over temp protection and an audio alert when the test is complete
Ship weight: 16 lbs (Comes w ring terminal leads and Elcon-style two-wire connector to
accommodate most battery types Special connectors are sold separately Inquire as necessary) NE WT 80 LBS CONNECTOR TYPE |
 |
4164 |
CONCORDE 12V8A BatteryMlNDer® (PN 12248-AA-S5 ): Aviation Specific Maintenance Charger - De-Sulfator &
Conditioner Designed to "Plug 'n Run" it eliminates the need to set output current or battery type
Comes with ring terminal leads (long & short cable) and a temperature
sensor For use with lead-acid batteries only (No Universal AC) NE WT 25 LBS CONNECTOR TYPE |
 |
4165 |
CONCORDE 24V4A BatteryMlNDer® (PN 24041-AA-S5): Aviation Specific Maintenance Charger - De-Sulfator &
Conditioner Designed to "Plug 'n Run" it eliminates the need to set output current or battery type
Comes with ring terminal leads (long & short cable) and a temperature
sensor For use with lead-acid batteries only (No Universal AC) NE WT 25 LBS CONNECTOR TYPE |
 |
4166 |
CONCORDE BC-6000 Analyzer: Fully automatic testing for 12V24V lead-acid batteries only
Testing is powered by the battery being tested There is no AC power required
The constant current load is adjustable in 1 amp increments from 10 to 50 ADC
Features: LCD display Over temp protection an audio alert when the test is complete and USB
PC Connection with BC Report Utility Software for producing a hard copy print out of test results
Ship weight: 16 tbs (Comes w ring terminal leads and Elcon-style two-wire connector to
accommodate most battery types Special connectors are sold separately Inquire as necessary) NE WT 80 LBS CONNECTOR TYPE |
 |
4167 |
CONCORDE BC-7000 Analyzer: Fully automatic testing for 12V24V lead-acid or nickel-cadmium batteries
The constant current load is adjustable in 01 amp increments (+- 15%) from 5 to
15 ADC and in 1 amp increments (+I- 10%) from 15 to 50 ADC This analyzer can accommodate
Concorde's low Ah emergency series batteries Additionally the adjustable EPV (End Point
Voltage) allows use with both lead-acid & nickel-cadmium battery types Universal AC Power
input 85-264VAC (47 to 63 Hz)
Features: LCD display Over temp protection an audio alert when the test is complete and USB
PC Connection with BC Report Utility Software for producing a hard copy print out of test results
Ship weight: 16 tbs (Comes wl eyelit connector and Elcon-style two-wire connector to
accommodate most battery types Special connectors are sold separately Inquire as necessary) NE WT 80 LBS CONNECTOR TYPE |
 |
4168 |
CONCORDE BC-8000 ChargerAnalyzer: The capacity test constant current load is adjustable in 01 Ampere
increments from 05 to 15 Amperes (+1- 15%) and 15 to 50 Amperes (+- 10%) A USB 20 port
for PC connection and BC Report Utility software allow for hard copy print out of test results
The charger has adjustable output from 30 to 360 Vdc (01 steps) and 005 to 25Adc
It features constant voltage or constant current charging capability with adjustable charge time
from 1 - 999 minutes
Common features: Universal AC power input 90-264vac (47 to 64hz); Over-temp protection;
Audio warning when capacity test is complete or unit malfunctions; 4-line LCD display
(10mv voltage resolution) & real time internal clock There is a single or two step charge routine
Comes with ring terminal leads and Elcon-style two-wire connector to accommodate
most new battery types Special connectors are sold separately Inquire as necessary
For use with lead-acid or nickel-cadmium batteries NE WT 80 LBS CONNECTOR TYPE |
| Info |
Part No. |
Description |
 |
4169 |
CONCORDE BC-9000 Battery Charger: The charger has adjustable output from 30 to 360 Vdc (01 steps) and
005 to 25Adc It features constant voltage or constant current charging capability with
adjustable charge time from 1 - 999 minutes Allows for single or two-step charge routine
Common features: Universal AC power input 90-264vac (47 to 64hz); 4-line LCD display (10mv
voltage resolution; Removable DC charge cord Anodized aluminum case Over-temp
protection Comes with ring terminal leads and Elcon-style two-wire connector to accommodate
most new battery types Special connectors are sold separately Inquire as necessary
For use with lead-acid or nickel-cadmium batteries NE WT 80 LBS CONNECTOR TYPE |
 |
4170 |
CF1 Calibrator |
 |
4171 |
24V4A BatteryMINDer Aviation Specific Maintenance Charger - De-Sulfator & Conditioner |
 |
5-0118 |
Kit Temperature Sensor TS-C5 |
 |
5-0122 |
CONCORDE Kit Temperature FAA-PMA FAA-PMA Sensor TS-C2A Gulfstream 200 & other RG-3XX "L" series
installations NE WT 25 LBS CONNECTOR TYPE |
 |
5-0123 |
CONCORDE Kit Temperature FAA-PMA FAA-PMA Sensor TS-C3 Bombardier 300 (Contains hardware for both -1 and -
2 versions) NE WT 25 LBS CONNECTOR TYPE |
 |
5-0124 |
CONCORDE Kit Temperature FAA-PMA Sensor TS-C4 Embraer ERJ 135145 (Contains hardware for both -
1 and -2 versions) NE WT 25 LBS CONNECTOR TYPE |
 |
5-0125 |
CONCORDE Kit Temperature FAA-PMA Sensor TS-C6 Dassault Falcon or other aircraft with Foxtronics
temperature monitoring systems NE WT 25 LBS CONNECTOR TYPE |
 |
5-0126 |
Kit Temperature Sensor TS-C7 |
 |
5-0166 |
Kit Temperature Sensor TS-C11A Bombardier CL-600 Series |